Tracer 1210  MPPT 10A solar charge controller

The controller with maximum power point tracking technology is used in off-grid solar system.

Adopting advanced tracking algorithm, it can get the maximum power point of solar module to improve the efficiency of whole system.

The controller optimize the controlling within battery charging to extend battery life.

Self diagnostics and electronic protection can avoid mistakes within installation.

Function： According to the voltage of battery, controller will adjust the charging current and decide if to supply power to the loads.

• Visual LCD graphic symbol
• Grade auto switch of system voltage
• Auto temperature compensation.
• Settable working modes of loads
• Remote Monitoring Function
• Protection for battery low voltage .
• Battery reversed protection.
• Brief key operation
• Intelligent PWM Charging Mode
• Adjustable charging & discharging parameter
• Controller is always counting and saving the Charging Current Hours and Discharging Current Hours of the Battery.
• Protection for battery back discharging
• Overloading & short-circuit protection
• Delayed auto restart after overloading protection

MPPT 10A Tracer 1206/1210/1215

• System Voltage 12V DC / 24V DC

• Rated Battery Current 10A

• Rated load current 10A

• Max. Input Voltage

• TRACER 1206 60V DC

• TRACER 1210 100V DC

• TRACER 1215 150V DC

• Max. PV Input Power

• 12V System 120W

• 24V System 240W

  1.The controller will recognize the system when powered up. If the battery voltage is lower than 18V, it will recognize the system as 12V. If the battery voltage is greater than 18V, it will recognize the system as 24V.
  2.The voltage of solar input should never exceed the max. Input voltage to avoid the damage of the controller. 

Electrical

Battery charging

Battery voltage setting(25C)

Environmental Specification