Solar Charge and Discharge Controller 30A 20A 10A for 12V 24V Lead Acid Lithium-ion LiFePO4 Battery With Dual USB LCD Regulator CM20KL-10A
This is PWM Solar Controller 30A 20A 10A, You can use this solar controller to charge your Lead Acid,Gel,Lithium-ion,LIFePO4 Batteries,we can provide one year warranty !
Feature:
Build-in industrial micro controller.
Big LCD display,all adjustable parameter.
Fully 3-stagePWM charge management.
Build-in short-circuit protection,open-circuit protection,reverseprotection,over-load protection.
Dual mosfet Reversecurrent protection ,low heat production.
Display:
1.Connect the battery to the charge regulator - plus and minus.(firstly)
2.Connect the solar module to the regulator - plus and minus.(secondly)
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
Technical Paremeter:
Model | CM20K-10A-Li | CM20K-20A-Li | CM20K-30A-Li |
Battery Voltage | 12V 24V Auto | ||
Rated Current | 10A | 20A | 30A |
Max Solar Panel Input | 25V( 12V System) 50V(24V System) | ||
Battery Type |
B01=LEAD-ACID 12V
B02=LITHIUM ION 3s 3x3.7V= 11.1V
B03= LIFePO4 4s 4x3.2V= 12.8V
|
||
Charging Voltage | 13.7V(B01) 12.6V(B02) 14.6V(B03) | ||
Low Voltage Disconnect | 10.7V(B01) 9V(B02)10V(B03) | ||
Low Voltage Reconnect | 12.6V(B01) 10.5V(B02) 12V(B03) | ||
USB Output | 5V/2A | ||
Standby Loss | <10mA | ||
Working Temperature | -35~+60 °C | ||
SIZE/WEIGHT | 133*70*33mm /150g | ||
*all red color voltage X2 ,while using 24V system |
Photo:
![]() |
||