Better Price,Exactly Shipping Fee,Questions,please mail to me: lucy@ysolartech.com
OR Call Directly (Whatsapp, Wechat,Skype):+86 18376669949 to get quick reply.
Unique Factory 10A 20A 30A Solar Lighting Controller With Backlight LCD Display for solar battery charge regulator for system Z10 Z20 Z30
Brief Instruction
This is our Newest PWM Solar Controller 10A 20A 30A , It is only suitable for 12V and 24V Lead Acid Batteries :OPEN,AGM,GEL it has Big Back Light LCD Display ,Dual USB Output and Load Light Control , you can use max 23V Solar Panel to charge your 12V battery ,or max 46V solar panel to charge your 24v battery ,it can be used for your home PV system !
Features
3.Screen with backlight (Note:backlight ,backlight in no operation after 5S or so automatically shut down)
4.Dual USB output ,the maximum current of 2.5A ,to support Apple's mobile phone charging
5 Fully 3-State PWM charge management
6.Build-in short-circuit protection,open-circuit protection ,reverse protection ,over-load protection
7.Reverse current protection ,low hear production
Specification
Connection
1.The battery positive and negative pole according to the icon access controller ,the controller will automatically detect the battery voltage ,the load positive and negative pole according to the icon access controller ,pay attention not to answer ,the solar panel according to the icon access controller ,
Note:1. please strictly follow the above order to access ,otherwise it may damage the controller or other components ;the disassembly sequence is contrary to the wiring order
2. 12V system with 17.5V solar panels ,24V system with 36V solar panels
3.Load system Light,only that the load output has been turned on ,and there is no connection to the laod ,
4.12V load output of the largest 24V .120W maximum outupt 240W .the laod can nto exceed the output power ,if there is an inverter ,the inverter can be directly connected to the battery ,because the inverter iteself comes with under voltage protection
As long as it is not set to [1-13H] or [0H] model ,(The optical delay model).Battery not under pressure condition (Battery symbol does not blink),Single short press the turn key can open/close load output
LCD Display
1.Short press menu key to cycle through the interface and parameters
2.Long press the menu button for 5S to enter the settings manually.this number will be flashing,
Into the corresponding set project on turn,turn key adjustment parameters you want value,after the completion of the system of automatic memory setting value and exit setup menu.
3.In interface 2-5 long press(UP)to enter setting.
Pictures
OEM Service samples
Change the Sticker Color and Print the Logo
Change the Shell Color