CMP45 50A Solar Charge Controller 12V 24V auto switch
CMP45 50A Solar Charge Controller 12V 24V auto switchCMP45 50A Solar Charge Controller 12V 24V auto switchCMP45 50A Solar Charge Controller 12V 24V auto switchCMP45 50A Solar Charge Controller 12V 24V auto switch

CMP45 50A Solar Charge Controller 12V 24V auto switch

CODE: CMP45

$90.00

In stock

Our quantity discounts:

Quantity  2+   5+   10+   20+   30+ 
Price  $88.00   $86.00   $83.00   $80.00   $75.00 

CMP45 Solar Charge Controller Regulator has three types,rating 20A,30A,40A 50A and the voltage is 12V or 24V auto switch.
CPU controlled Juta CMP45 (20A-50A) solar charge controller is able to adjust the charge current and decide if to supply the loads electricity according to the voltage of battery.

Package including:
1.1X CMP45 solar charge controller
2.1X Thermoscope
3.1X USERS` Manual

Protection:

  1. Keep the battery on full voltage condition.
  2. Over-charging/discharging Protection.
  3. Prevent supplying electricity from the battery to solar panels during nights.
  4. Reverse Polarity Protection for Battery
  5. Reverse Polarity Protection for Solar panels
  6. Overload protection .
  7. Short circuit Protection
  8. Protection from the lightning strike
     

LCD Screen
LCD Screen show the voltage of battery, charging current and current of loads in turn in every 5 seconds.

Thermoscope(Standard Accessory)
Installation:Plug the thermoscope into the socket (top) of controller before running of controller, and then connect battery with the controller. The thermoscope will normally work after one minute. (Operate as indicated in the fourth Chapter, the environmental temperature of controller will be available on LCD).
When controller starts up, controller will self-setup the Charging-off voltage, the Load-off voltage and the Load-on voltage according to the voltage of battery. These default parameters are setup as the standard environment temperature is 25℃.

Circuit diagram
Connect “+” and “-”poles of solar panel with the correct ports on the controller (the first and second ports from the left).
Connect “+” and “-” poles of battery with the correct ports on the controller (the third and fourth ports from the left).
Connect “+” and “-” poles of load with the correct ports on the controller (the fifth and sixth ports from the left).

CMP45 solar charge controller regulator circuit diagram.jpg

CMP45 solar charge controller regulator circuit diagram

 Juta CMP45 Data Sheet

Mode

Voltage

Max Load Current

Full Charge Cut

Resume Voltage

Low Voltage Cut

Temp Compensation

Zero Load Loses

Min Wire Size

Voltage Drop

CMP45 30A

12V or 24V
Auto switch

≤30A

13.7V/12V;
×2/24V;

12.6V/12V;
×2/24V;

10.5V/12V;
×2/24V;

-3mv/℃/cell
Default,
or
user set

≤45mA

6 mm^2

<520mv

CMP45 40A

≤40A

<550mv

CMP45 50A

≤50A

<600mv

 

Type the characters you see in the picture above.

None
Loading...