CLP-1.5 Solar Regulator we also called solar garden light controller for it`s often used for solar garden light,it`s samll and cheap.

Notice:This product has light and time control.
Light control:When daylight starts to occur then the light source goes off. Meanwhile the Solar Panels will charge the batteries. when there is no sunlight the garden light will switch on.
Time control:There is an eight hours time control,that means it will go off when the Lights automatically switch off after eight hours.

The controller is below 6W (12V) or below 12W (24V). It’s small in size and waterproof.

Function:
1.Prevent the battery from over charging, over discharging and Reverse discharging to solar panel during nights.
2.Controller will start the lighting system in the evening automatically according to the surrounding luminance.
3.Controller can automatically shut down the lighting system:
A: Automatically shut down the light at dawn when battery is full.
B: Automatically shut down the light when battery is low.

Connection (As indicated in diagram): 

1.Connect the “+”, “- ” Poles of the battery to the correct wires (bottom)of controller (the RED wire is “+”).
2.Connect the “+”, “- ” Poles of the solar panel to the correct wires(left) of controller (the RED wire is “+”).
3.Connect the “+”, “-” Poles of the load to the correct wires (right) of controller (the RED wire is “+”).

CLP-1.5 Solar Garden light Controller Specifications: